SHOWER UPGRADE 101 - TOP TIPS FOR NEW UNIT INSTALLATION

Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Make An Appointment



We've unearthed this great article involving How to Install a Direct-to-Stud Shower Enclosure below on the web and decided it made good sense to write about it with you over here.


How to Install a Direct-to-Stud Shower Enclosure
An effective shower setup requires careful preparation as well as a lot of work. In most cases, you will certainly need to do three sorts of jobs: mounting walls, installing the plumbing, and also ending up walls.

Prep work


First of all, you should decide on the type of shower that you wish to mount. It is very important to determine whether the chosen shower can handling certain systems and can regulate a secure degree of water with the boiler. Many shower units nowadays are designed to be adaptable to various water pressures (such as saved warm water as well as cold keys).
It is likewise important to think about the water stress as well as the planning of the piping and also water drainage for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be connected to the bathroom faucet according to your requirement, and also the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and also extremely straightforward to install. However, although the pipe connection is simple, it is conveniently dislodged. In addition, it is troublesome to adjust the temperature level.

  • Bath/Shower Mixer: The pipe and spray of this sort of shower are integrated with a bathroom mixer tap, and the temperature level can be adjusted with the bathroom taps. It is a very affordable choice and also no additional plumbing is entailed. Nevertheless, the bath/shower mixers also experience inconvenient temperature control alternatives.

  • Handbook Mixer: The hose pipe and also spray of a hands-on mixer shower unit belong of the wall unit and also the hot and cold water materials are connected to a single valve The temperature and also pressure of the water are regulated with either one or a variety of handles (in much more pricey showers). Although temperature control is a lot easier in hands-on mixer types, they are extra costly than the previously pointed out mixers. They also need additional plumbing of cold and hot water pipelines.

  • Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall device and the cold and hot water supplies are linked to a single valve below as well. It is full with a built-in stabiliser to self-adjust the water temperature level and to avoid it from coming to be as well warm. One of the greatest advantages of a thermostatic mixer shower type includes convenient temperature control. Nonetheless, it is the most costly of the various mixer options.

  • Power Shower: A power shower is a solitary device including an effective electrical pump that is capable of changing both the water stress and temperature level. This sort of shower can be fitted if there is water supply from a cold water tank as well as a warm water cyndrical tube. A power shower makes the change of both pressure and temperature level easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed into a keys cold water supply and it heats up the water electrically. It is necessary to note that for this shower kind to be mounted, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also stress to be adjusted through a knob. Designs with temperature stabilisers are much better as they continue to be untouched by various other faucets elsewhere in operation within the household. A major drawback of electric showers is that the control knob only enables the choice of high temperatures at less stress, or reduced temperature levels at a higher stress. This is bothersome in the winter when the spray is usually weak and also the keys water is cooler. Nonetheless, this issue is dealt with in some designs which are readily available with a winter/summer setup.


  • Method


    Depending on the type of shower you want to set up, the shower head should either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it must have a check valve.
    Before starting, it is a good idea to note the placements of the shower head and also control, and also to intend the pipe-work involved. Additionally, the drainage system to remove the waste water will require to be intended. Both settings of the wire course and also the shower button will certainly also need to be considered if an instantaneous or electric shower unit is being installed.
    Use the instruction overview given with the shower device to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is very important to remove the water system. In order to secure the pipes, they ought to be offered a water-proof covering and also fitted with isolating shutoffs. The pipelines can after that be buried into the wall and also smudged over to neaten the total look.
    Fit the base tray, shower head, and fittings.
    Attach the major shower control to the pipelines that will be supplying the water (This may call for a women screw thread adapter).
    Reconnect the water supply and also examination the pipes for any kind of leaks, as some might need tightening.
    If you are mounting an electrical shower, bear in mind to switch off the electricity supply prior to making any electric connections. As soon as these connections have actually been made (there ought to be guidance within the instruction manual), the power supply can be switched back on.

    Readjusting Water Pressure to Match Your Shower


    The cold water reservoir can be raised to a greater elevation (sometimes as low as 150mm (6inches)) by fitting a solid wood support under it - potentially made up of struts and blockboards. If you pick this option, the major and circulation pipelines will additionally have to be increased to fulfill the new elevation of the reservoir.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be connected right into the power supply in order to run.

    Piping as well as Water drainage


    It is best to use 15mm diameter supply pipelines, and make the runs to the shower as brief and also straight as possible so regarding keep optimal pressure and also minimise warm loss. Furthermore, by reducing the use of arm joints for pipeline corners, you can reduce the resistance in the circulation of the water. You can achieve this by bending the pipelines rather.

    Most Common Errors


  • Going against or overlooking local code limitations.

  • Using pipes that are also small.

  • Connecting copper to galvanized without utilizing a brass or dielectric suitable in between both.

  • Not using tape or pipe compound at threaded joints.

  • Not leveling your components when mounting them.

  • Not mounting an air gap filling for fixtures.

  • Cutting supply stub outs as well brief to mount the shutoff valves onto after the ended up wall surface remains in place.

  • Not appropriately straightening tubes right into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will certainly create a leakage.).

  • When transforming the water back on in your house, constantly run the outdoors tube shutoff or purge your commodes to hemorrhage dust and also air from the lines. This particles can create troubles in your sink faucets as well as other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a One-Piece Shower Unit

    We were shown that report about How to Build a Shower Enclosure for Your DIY Bathroom from someone on a different site. So long as you liked our blog entry plz don't forget to pass it around. Thanks so much for your time invested reading it.




    Schedule Today


    Report this page